Archives

Play Video

Wearable health monitor stretches with skin

A wireless, wearable monitor built with stretchable electronics could allow comfortable, long-term health monitoring of adults, babies, and small children. (Credit: John Toon/Georgia Tech)

A wireless, wearable monitor built with stretchable electronics could allow comfortable, long-term health monitoring, researchers report.

The monitor works for adults, babies, and small children without concern for skin injury or allergic reactions conventional adhesive sensors with conductive gels cause.

The soft and conformable monitor can broadcast electrocardiogram (ECG), heart rate, respiratory rate, and motion activity data as much as 15 meters (about 49 feet) to a portable recording device such as a smartphone or tablet computer. The researchers mounted the electronics on a stretchable substrate and connected them to gold, skin-like electrodes through printed connectors that can stretch with the medical film. They’ve studied the monitor on both animal models and humans.

Stretchy wearable health monitor
The monitor is built on a flexible substrate. (Credit: John Toon/Georgia Tech)

Monitoring on the move

“This health monitor has a key advantage for young children who are always moving, since the soft conformal device can accommodate that activity with a gentle integration onto the skin,” says Woon-Hong Yeo, an assistant professor in the George W. Woodruff School of Mechanical Engineering and biomedical engineering department at Georgia Institute of Technology. “This is designed to meet the electronic health monitoring needs of people whose sensitive skin may be harmed by conventional monitors.”

Because the device conforms to the skin, it avoids signal issues that the motion of the typical metal-gel electrodes across the skin can create. The device can even obtain accurate signals from a person who is walking, running, or climbing stairs.

“When you put a conventional electrode on the chest, movement from sitting up or walking creates motion artifacts that are challenging to separate from the signals you want to measure,” he says. “Because our device is soft and conformal, it moves with the skin and provides information that cannot be seen with the motion artifacts of conventional sensors.”

Catching issues early

Continuous evaluation with a wireless health monitor could improve the assessment of children and help clinicians identify trends earlier, potentially facilitating intervention before a condition progresses, says Kevin Maher, a pediatric cardiologist at Children’s Healthcare of Atlanta.

“The generation of continuous data from the respiratory and cardiovascular systems could allow for the application of advanced diagnostics to detect changes in clinical status, response to therapies, and implementation of early intervention,” Maher says. “A device to literally follow every breath a child takes could allow for early recognition and intervention prior to a more severe presentation of a disease.”

“The membrane is waterproof, so an adult could take a shower while wearing it. After use, the electronic components can be recycled.”

In the home, a wearable monitor might detect changes that might not otherwise be apparent, he says. In clinical settings, the wireless device could allow children to feel less “tethered” to equipment. “I see this device as a significant change in pediatric health care and am excited to partner with Georgia Tech on the project,” Maher adds.

The monitor uses three gold electrodes in the film that also contains the electronic processing equipment. The entire health monitor is just three inches in diameter, and a more advanced version under development will be half that size. A small rechargeable battery powers the wireless monitor currently, but future versions may replace the battery with an external radio-frequency charging system.

Yeo and his collaborators, including first author and postdoctoral fellow Yun-Soung Kim, are focusing on pediatric applications because of the need for ambulatory monitoring in children. However, they envision that the health monitor could also be used for other patient groups, including older adults who may also have sensitive skin. For adults, there would be additional advantages.

“The monitor could be worn for multiple days, perhaps for as long as two weeks,” Yeo says. “The membrane is waterproof, so an adult could take a shower while wearing it. After use, the electronic components can be recycled.”

2 versions of the wearable health monitor

Researchers have developed two versions of the monitor. One is based on medical tape and designed for short-term use in a hospital or other care facility, while the other uses a soft elastomer medical film approved for use in wound care. The latter can remain on the skin longer.

“The devices are completely dry and do not require a gel to pick up signals from the skin,” Yeo explains. “There is nothing between the skin and the ultrathin sensor, so it is comfortable to wear.”

Because the monitor can be worn for long periods of time, it can provide a long-term record of ECG data helpful to understanding potential heart problems. “We use deep learning to monitor the signals while comparing them to data from a larger group of patients,” Yeo says. “If an abnormality is detected, it can be reported wirelessly through a smartphone or other connected device.”

Fabrication of the monitor’s circuitry uses thin-film, mesh-like patterns of copper that can flex with the soft substrate. The chips are the only parts that are not flexible, but they are mounted on the strain-isolated soft substrate instead of a traditional plastic circuit board.

What’s next?

As next steps, Yeo plans to reduce the size of the device and add features to measure other health-related parameters such as temperature, blood oxygen, and blood pressure. A major milestone would be a clinical trial to evaluate performance against conventional health monitors.

For Yeo, who specializes in nano- and micro-engineering, the prospect of seeing the device in clinical trials—and ultimately in children’s hospitals—is a powerful incentive.

“It will be a dream come true for me to see something we have developed be helpful to someone who is suffering,” he says. “We all want to see developments in science and engineering translated into improved patient care.”

Researchers detail the monitor in the journal Advanced Science.

Additional coauthors are from Georgia Tech, Wichita State University, Emory University, and the Yonsei University Wonju College of Medicine in Korea. Support for the research came from the Imlay Innovation Fund at Children’s Healthcare of Atlanta, NextFlex (Flexible Hybrid Electronics Manufacturing Institute), and a seed grant from the Institute for Electronics and Nanotechnology at Georgia Tech.

Source: Georgia Tech

Play Video

Electronic ‘tattoo’ monitors heart for days

(Credit: UT Austin)

New wearable technology made from stretchy, lightweight material could make heart health monitoring easier and more accurate, a new study reports.

Existing electrocardiogram (ECG) technology hasn’t changed much in almost a century, researchers say.

The new device is so lightweight and stretchable that it can remain over the heart for extended periods with little or no discomfort. It measures cardiac health in two ways, taking electrocardiograph and seismocardiograph readings simultaneously.

Most of us are familiar with the electrocardiogram (ECG), a method that records the rates of electrical activity produced each time the heart beats. Seismocardiography (SCG) is a measurement technique using chest vibrations associated with heartbeats.

A smartphone remotely powers the e-tattoo, which researchers say is the first ultrathin and stretchable technology to measure both ECG and SCG.

“We can get much greater insight into heart health by the synchronous collection of data from both sources,” says Nanshu Lu, an associate professor in the aerospace engineering and engineering mechanics and biomedical engineering departments at the University of Texas at Austin.

ECG readings alone are not accurate enough for determining heart health, but they provide additional information when combined with SCG signal recordings. Like a form of quality control, the SCG indicates the accuracy of the ECG readings.

Although soft e-tattoos for ECG sensing are not new, other sensors, such as the SCG sensor, are still made from nonstretchable materials, making them bulky and uncomfortable to wear.

The new e-tattoo is made of a piezoelectric polymer called polyvinylidene fluoride, capable of generating its own electric charge in response to mechanical stress. The device also includes 3D digital image correlation technology used to map chest vibrations in order to identify the best location on the chest to place the e‐tattoo.

The e-tattoo has another advantage over traditional methods. Usually an ECG measurement requires going into a doctor’s office, where doctors can monitor heart health for only a couple of minutes at a time. Patients can wear the new device for days for constant heart monitoring.

The device is the latest incarnation of Lu’s electronic tattoo technology, a graphene-based wearable device that can be placed on the skin to measure a variety of body responses, from electrical to biomechanical signals.

Lu and colleagues are already working on improvements to data collection and storage for the device, as well as ways to power the e-tattoo wirelessly for longer periods. They recently developed a smartphone app that not only stores the data safely but can also show a heart beating on the screen in real time.

The paper appears in Advanced Science. The Office of Naval Research, the Air Force Office of Scientific Research, the National Science Foundation, and the National Institutes of Health funded the work.

Source: University of Texas at Austin

Play Video

Wearable ‘microbrewery’ tracks radiation exposure

Workers in hospitals and nuclear facilities can wear disposable yeast badges to check their daily radiation exposure instantly. (Credit: Kayla Wiles/Purdue)

Yeast “microbreweries” within disposable badges could help hospital lab workers track daily exposure to radiation, which would allow faster assessment of tissue damage that could lead to cancer.

Made from freezer paper, aluminum, and tape, the patch works by simply adding a drop of water to activate the yeast to show radiation exposure, which an electronic device can read.

On a commercial level, the readout device could one day be a tablet or phone. Researchers could also adapt the badge in the future for nuclear power plant workers and victims of nuclear disasters.

Instant reading

“You would use the badge when you’re in the lab and recycle it after you’ve checked your exposure by plugging it into a device,” says Manuel Ochoa, a postdoctoral researcher in the School of Electrical and Computer Engineering at Purdue University.

adding yeast (radiation yeast)
Simply adding a drop of water to one of the badges activates yeast to show radiation exposure as read by an electronic device. (Credit: Kayla Wiles/Purdue)

Radiology workers are regularly exposed to low doses of radiation when they obtain patient imagery, such as X-rays. While protective gear largely keeps workers within a safe range of radiation exposure, absorbing a little bit is still inevitable.

Radiation doses creeping above regulated guidelines pose risk for developing conditions such as cancer, cataracts, skin irritation, or thyroid disease.

“Currently, radiology workers are required to wear badges, called dosimeters, on various parts of their bodies for monitoring their radiation exposure,” says Babak Ziaie, professor of electrical and computer engineering. “They wear the badges for a month or two, and then they send them to the company that made them. But it takes weeks for the company to read the data and send a report back to the hospital. Ours give an instant reading at much lower cost.”

Easy readout

The success of the badge lies in the quick and measurable response of yeast to radiation: The higher the radiation dose, the higher the percentage of yeast cells that die. Wetting the badge activates the cells that are still alive to eat glucose and release carbon dioxide—the same fermentation process responsible for brewing beer and making bread rise.

When carbon dioxide bubbles at the surface, ions also form. The concentration of these ions increases the electrical conductivity of yeast, which can be measured by hooking up the badge to a readout system.

Wearable patch measures stress hormone in sweat

“We use the change in electrical properties of the yeast to tell us how much radiation damage it incurred. A slow decrease in electrical conductivity over time indicates more damage,” says Rahim Rahimi, postdoctoral researcher in electrical and computer engineering.

Numbers from the readout system translate to rads—the units used by entities like the Occupational Safety and Health Administration to specify limits on how much radiation human tissue can safely absorb. Skin of the whole body, for example, shouldn’t be exposed to more than 7.5 rad over a three-month period.

The new device can detect a radiation dose as little as 1 millirad in the yeast badges, which is comparable to current commercial badges.

Yeast is also known to be genetically similar to human tissue. Data from the badges can, therefore, inform future work on how radiation damage happens to human DNA and proteins.

Tiniest wearable sticks on your nail to monitor UV rays

“For yeast, it seems that radiation primarily affects the cell walls of the membrane and mitochondria,” Ochoa says. “Since biologists are already familiar with yeast, then we’re more likely to understand what’s causing the biological effects of radiation in organic matter.”

The findings appear in Advanced Biosystems. A patent is pending for the technology via the Purdue Research Foundation. NextFlex funded the work.

Source: Purdue University