Play Video

Tiny robotic fly gets power from laser beam

RoboFly is slightly heavier than a toothpick. (Credit: Mark Stone/U. Washington)

A new kind of robotic fly, called RoboFly, receives power from a laser beam. This cuts the cord between the robot and the ground and lets it take off on its own.

“Before now, the concept of wireless insect-sized flying robots was science fiction.”

Insect-sized flying robots could help with time-consuming tasks like surveying crop growth on large farms or sniffing out gas leaks. These robots soar by fluttering tiny wings because they are too small to use propellers, like those seen on their larger drone cousins. Small size is advantageous: These robots are cheap to make and can easily slip into tight places that are inaccessible to big drones.

But current flying robo-insects are still tethered to the ground. The electronics they need to power and control their wings are too heavy for these miniature robots to carry.

RoboFly’s laser-based power source may be one small flap for a robot, but it’s one giant leap for robot-kind.

RoboFly laser
To power RoboFly, the engineers pointed an invisible laser beam (shown here in red laser) at a photovoltaic cell, which is attached above the robot and converts the laser light into electricity. (Credit: Mark Stone/U. of Washington)

The robotic fly is slightly heavier than a toothpick and gets power through a laser beam. It uses a tiny onboard circuit that converts the laser energy into enough electricity to operate its wings.

“Before now, the concept of wireless insect-sized flying robots was science fiction. Would we ever be able to make them work without needing a wire?” says coauthor Sawyer Fuller, an assistant professor in the mechanical engineering department of the University of Washington. “Our new wireless RoboFly shows they’re much closer to real life.”

The engineering challenge is the flapping. Wing flapping is a power-hungry process, and both the power source and the controller that directs the wings are too big and bulky to ride aboard a tiny robot. So Fuller’s previous robo-insect, the RoboBee, had a leash—it received power and control through wires from the ground.

But a flying robot should be able to operate on its own. Fuller and team decided to use a narrow invisible laser beam to power their robot. They pointed the laser beam at a photovoltaic cell, which is attached above RoboFly and converts the laser light into electricity.

RoboFly circuit
To make RoboFly wireless, the engineers designed a flexible circuit (yellow) with a boost converter (copper coil and black boxes at left) that boosts the seven volts coming from the photovoltaic cell into the 240 volts needed for flight. This circuit also has a microcontroller brain (black square box in the top right) that lets RoboFly control its wings. (Credit: Mark Stone/U. of Washington)

“It was the most efficient way to quickly transmit a lot of power to RoboFly without adding much weight,” says coauthor Shyam Gollakota, an associate professor in the Paul G. Allen School of Computer Science & Engineering.

Still, the laser alone does not provide enough voltage to move the wings. That’s why the team designed a circuit that boosted the seven volts coming out of the photovoltaic cell up to the 240 volts needed for flight.

To give RoboFly control over its own wings, the engineers provided a brain: They added a microcontroller to the same circuit.

“The microcontroller acts like a real fly’s brain telling wing muscles when to fire,” says coauthor Vikram Iyer, a doctoral student in the electrical engineering department. “On RoboFly, it tells the wings things like ‘flap hard now’ or ‘don’t flap.'”

Cockroaches teach robots to clamber and scurry

Specifically, the controller sends voltage in waves to mimic the fluttering of a real insect’s wings.

“It uses pulses to shape the wave,” says Johannes James, the lead author and a mechanical engineering doctoral student. “To make the wings flap forward swiftly, it sends a series of pulses in rapid succession and then slows the pulsing down as you get near the top of the wave. And then it does this in reverse to make the wings flap smoothly in the other direction.”

For now, RoboFly can only take off and land. Once its photovoltaic cell is out of the direct line of sight of the laser, the robot runs out of power and lands. But the team hopes to soon be able to steer the laser so that RoboFly can hover and fly around.

RoboFly size comparison
RoboFly is slightly larger than a real fly. (Credit: Mark Stone/U. Washington)

While RoboFly is currently powered by a laser beam, future versions could use tiny batteries or harvest energy from radio frequency signals, Gollakota says. That way, their power source can be modified for specific tasks.

Future RoboFlies can also look forward to more advanced brains and sensor systems that help the robots navigate and complete tasks on their own, Fuller says.

“I’d really like to make one that finds methane leaks,” he says. “You could buy a suitcase full of them, open it up, and they would fly around your building looking for plumes of gas coming out of leaky pipes. If these robots can make it easy to find leaks, they will be much more likely to be patched up, which will reduce greenhouse emissions.

“This is inspired by real flies, which are really good at flying around looking for smelly things. So we think this is a good application for our RoboFly.”

Robots still can’t outdo nature’s tiny speedsters

The team will present its findings at the International Conference on Robotics and Automation in Brisbane, Australia.

The University of Washington and a Microsoft student fellowship funded the research.

Source: University of Washington