Play Video

Device could use your motion to charge phone

Researchers have made an ultrathin energy harvesting system that can generate small amounts of electricity when it is bent or pressed, even at the very low frequencies that characterize human motion.

The device could lead to clothing that uses motion to generate energy that could be used to charge a cell phone or other small electronic devices.

Human ‘charging depots’

“In the future, I expect that we will all become charging depots for our personal devices by pulling energy directly from our motions and the environment,” says Cary Pint, an assistant professor of mechanical engineering at Vanderbilt University, who directed the research.

energy harvesting device
Graduate student Kathleen Moyer holds up the guts of the ultrathin energy harvesting device in a glove box. It is so thin it can be embedded in fabric. (Credit: John Russell/Vanderbilt)

“When you look at Usain Bolt, you see the fastest man on Earth. When I look at him, I see a machine working at 5 Hertz.”

“This is timely and exciting research given the growth of wearable devices such as exoskeletons and smart clothing, which could potentially benefit from Dr. Pint’s advances in materials and energy harvesting,” observes Karl Zelik, an assistant professor of mechanical and biomedical engineering, an expert on the biomechanics of locomotion who did not participate in the device’s development.

Currently, lots of research aims to find effective ways to tap ambient energy sources. These include mechanical devices designed to extract energy from vibrations and deformations; thermal devices aimed at pulling energy from temperature variations; radiant energy devices that capture energy from light, radio waves, and other forms of radiation; and, electrochemical devices that tap biochemical reactions.

“Compared to the other approaches designed to harvest energy from human motion, our method has two fundamental advantages,” says Pint. “The materials are atomically thin and small enough to be impregnated into textiles without affecting the fabric’s look or feel and it can extract energy from movements that are slower than 10 Hertz—10 cycles per second—over the whole low-frequency window of movements corresponding to human motion.”

“When you look at Usain Bolt, you see the fastest man on Earth. When I look at him, I see a machine working at 5 Hertz,” says Nitin Muralidharan, a doctoral student who co-led the effort to make and test the devices.

energy harvesting demo
Engineering undergraduate Thomas Metke demonstrates the ultrathin energy harvesting device. The device is taped across his elbow. The electrical current that it generates when he pumps his arm is displayed on the computer monitor. (Credit: John Russell/Vanderbilt)

Extracting usable energy from such low frequency motion has proven to be extremely challenging. A number of research groups are developing energy harvesters based on piezoelectric materials that convert mechanical strain into electricity.

These materials, however, often work best at frequencies of more than 100 Hertz. This means that they don’t work for more than a tiny fraction of any human movement so they achieve limited efficiencies of less than 5-10 percent even under optimal conditions.

“Our harvester is calculated to operate at over 25 percent efficiency in an ideal device configuration, and most importantly harvest energy through the whole duration of even slow human motions, such as sitting or standing,” Pint says.

Try, try again

The lab’s ultrathin energy harvester is based on the group’s research on advanced battery systems.

Over the past 3 years, the team has explored the fundamental response of battery materials to bending and stretching. They were the first to demonstrate experimentally that the operating voltage changes when battery materials are placed under stress. Under tension, the voltage rises and under compression, it drops.

The team collaborated with Greg Walker, associate professor of mechanical engineering, who used computer models to validate these observations for lithium battery materials. Results of that study appear in the journal ACS Nano.

These observations led Pint’s team to reconstruct the battery with both positive and negative electrodes made from the same material.

…the engineers can make their devices as thin or as thick as needed for specific applications…

Although this prevents the device from storing energy, it allows it to fully exploit the voltage changes caused by bending and twisting and so produce significant amounts of electrical current in response to human motions.

The lab’s initial studies were published in 2016. They were further inspired by a parallel breakthrough by a group at Massachusetts Institute of Technology who produced a postage-stamp-sized device out of silicon and lithium that harvested energy via the effect Pint and his team were investigating.

In response, the researchers decided to go as thin as possible by using black phosphorus nanosheets: A material has become the latest darling of the 2D materials research community because of its attractive electrical, optical, and electrochemical properties.

black phosphorus
Transmission electron microscope image showing the ultrathin layers of black phosphorus used in the energy harvesting device An angstrom (Å) is about the width of a single atom and is one tenth of a nanometer (nm). (Credit: Nanomaterials and Energy Devices Laboratory/Vanderbilt U.)

Because the basic building blocks of the harvester are about 1/5000th the thickness of a human hair, the engineers can make their devices as thin or as thick as needed for specific applications.

They have found that bending their prototype devices produces as much as 40 microwatts per square foot and can sustain current generation over the full duration of movements as slow as 0.01 Hertz, one cycle every 100 seconds.

The researchers acknowledge that one of the challenges they face is the relatively low voltage that their device produces. It’s in the millivolt range. However, they are applying their fundamental insights of the process to step up the voltage.

Device harvests energy from your moving fingers

They are also exploring the design of electrical components, like LCD displays, that operate at lower than normal voltages.

“One of the peer reviewers for our paper raised the question of safety,” Pint says. “That isn’t a problem here.

“Batteries usually catch on fire when the positive and negative electrodes are shorted, which ignites the electrolyte. Because our harvester has two identical electrodes, shorting it will do nothing more than inhibit the device from harvesting energy. It is true that our prototype will catch on fire if you put it under a blowtorch but we can eliminate even this concern by using a solid-state electrolyte.”

Thinking of the future

One of the more futuristic applications of this technology might be electrified clothing. It could power clothes impregnated with liquid crystal displays that allow wearers to change colors and patterns with a swipe on their smartphone.

“There are many directions that this could go…”

“We are already measuring performance within the ballpark for the power requirement for a medium-sized low-power LCD display when scaling the performance to thickness and areas of the clothes we wear,” Pint says.

Pint also believes there are potential applications for their device beyond power systems.

New battery turns wasted heat into energy

“When incorporated into clothing, our device can translate human motion into an electrical signal with high sensitivity that could provide a historical record of our movements. Or clothes that track our motions in three dimensions could be integrated with virtual reality technology. There are many directions that this could go,” he says.

The researchers describe the new energy harvesting system in the journal ACS Energy Letters.

A National Science Foundation grant and Vanderbilt University’s discovery grant program supported the research.

Source: Vanderbilt University