UC BERKELEY (US)—Engineers have created energy-scavenging nanofibers that could one day be woven into clothing and textiles to charge electronic devices.
“This technology could eventually lead to wearable ‘smart clothes’ that can power hand-held electronics through ordinary body movements,” says Liwei Lin, professor of mechanical engineering at the University of California, Berkeley, and head of the international research team that developed the fiber nanogenerators.
These nano-sized generators have “piezoelectric” properties that allow them to convert into electricity the energy created through mechanical stress, stretches, and twists. Because the nanofibers are made from organic polyvinylidene fluoride, or PVDF, they are flexible and relatively easy and inexpensive to manufacture.
While exact calculations still need to be worked out, researchers say that more vigorous movements, such as the kind one would create while dancing the electric boogaloo, would generate more power.
“And because the nanofibers are so small, we could weave them right into clothes with no perceptible change in comfort for the user,” says. Lin.
The fiber nanogenerators are described in this month’s issue of the journal Nano Letters.
The goal of harvesting energy from mechanical movements through wearable nanogenerators is not new. Other research teams have previously made nanogenerators out of inorganic semiconducting materials, such as zinc oxide or barium titanate.
“Inorganic nanogenerators—in contrast to the organic nanogenerators we created—are more brittle and harder to grow in significant quantities,” Lin says.
The tiny nanogenerators have diameters as small as 500 nanometers, or about 100 times thinner than a human hair and one-tenth the width of common cloth fibers.
The researchers repeatedly tugged and tweaked the nanofibers, generating electrical outputs ranging from 5 to 30 millivolts and 0.5 to 3 nanoamps, with no noticeable degradation after stretching and releasing the nanofibers for 100 minutes at a frequency of 0.5 hertz (cycles per second).
Lin’s team pioneered the near-field electrospinning technique used to create and position the polymeric nanogenerators 50 micrometers apart in a grid pattern.
The technology enables greater control of the placement of the nanofibers onto a surface, allowing researchers to properly align the fiber nanogenerators so that positive and negative poles are on opposite ends, similar to the poles on a battery. Without this control, the negative and positive poles might cancel each other out and reduce energy efficiency.
The researchers demonstrated energy conversion efficiencies as high as 21.8 percent, with an average of 12.5 percent.
“Surprisingly, the energy efficiency ratings of the nanofibers are much greater than the 0.5 to 4 percent achieved in typical power generators made from experimental piezoelectric PVDF thin films, and the 6.8 percent in nanogenerators made from zinc oxide fine wires,” says the study’s lead author, Chieh Chang, who conducted the experiments while he was a graduate student in mechanical engineering at UC Berkeley.
“We think the efficiency likely could be raised further,” Lin says.
“For our preliminary results, we see a trend that the smaller the fiber we have, the better the energy efficiency. We don’t know what the limit is.”
Researchers at the Technical University of Munich and the Chinese Academy of Sciences in Beijing contributed to the research, which was funded by the National Science Foundation and the Defense Advanced Research Projects Agency.
UC Berkeley news: http://newscenter.berkeley.edu/