Science & Technology - Posted by Jennifer La Montagne/Celeste Bragorgos-Illinois on Thursday, December 24, 2009 13:23 - 3 Comments
Wireless smart sensors inspect bridge
U. ILLINOIS (US)—An inexpensive wireless system designed to continuously—and reliably—monitor structural health has been successfully deployed at full scale on the Jindo Bridge in South Korea.
The joint project between the University of Illinois at Urbana-Champaign, KAIST in Korea, and the University of Tokyo is the first dense deployment of a wireless sensor network on a cable-stayed bridge and the largest of its kind for civil infrastructure to date.
The sensors were designed, developed, and tested by Bill Spencer, the Nathan M. & Anne M. Newmark Endowed Chair in the Department of Civil and Environmental Engineering, and Gul Agha, a professor in the Department of Computer Science,
The researchers say the sensors can be manufactured cheaply but still produce the high-fidelity data required for structural health monitoring.
Their research has also produced a customizable software framework that simplifies the development of structural health monitoring applications for smart sensor platforms.
In combination, their sensors and software create an integrated framework that can be utilized by most civil engineers without the need for extensive background in electrical engineering or computer science.
According to Spencer, more than 40 institutions throughout the world are now using the Illinois Structural Health Monitoring Project framework.
“It’s becoming the de facto standard for wireless sensing of civil infrastructure,” Spencer says.
Structural health monitoring is an emerging field that combines civil engineering knowledge with developments in sensor technology, information management, and networking technologies.
The goal is to achieve a more reliable alternative to traditional structure inspection techniques. Until now, though, its usefulness was limited by concerns about cost and effectiveness.
“Manual inspection of bridges costs millions of dollars, is relatively unreliable, and can only be carried out infrequently,” Spencer adds.
“Some real-world structural health monitoring deployments using wired sensors have been able to provide detailed information about the state of civil infrastructure. However, the enormous expense of installing traditional monitoring systems has significantly limited such deployments.”
The Illinois team’s framework addresses this issue by employing dense arrays of wireless smart sensors designed to record and transmit complex, high-fidelity data cheaply and efficiently.
The team’s technology employs concurrent and distributed real-time processing to overcome the limitations inherent in traditional centralized approaches, which Agha says is not feasible with moderate to large numbers of sensors. “Tremendous amounts of data must be sent to such a central station, requiring expensive, difficult-to-install wired networking and introducing a single point of failure,” Agha explains.
“Our research in distributed structural health monitoring using wireless sensor networks overcomes these problems and promises a robust, significantly lower-cost safer alternative to traditional structure inspection techniques.”
University of Illinois Engineering news: http://engineering.illinois.edu/