nanotube_thread_1

Nanotube thread conducts heat like a metal wire

RICE (US) — A new carbon nanotube fiber looks like textile thread and conducts electricity and heat like a metal wire.

Researchers describe an industrially scalable process for making the thread like fibers, which outperform commercially available high-performance materials in a number of ways, in the journal Science.

“We finally have a nanotube fiber with properties that don’t exist in any other material,” says lead researcher Matteo Pasquali, professor of chemical and biomolecular engineering and chemistry at Rice University. “It looks like black cotton thread but behaves like both metal wires and strong carbon fibers.”

The research team includes academic, government and industrial scientists from Rice; Teijin Aramid’s headquarters in Arnhem, the Netherlands; the Technion-Israel Institute of Technology in Haifa, Israel; and the Air Force Research Laboratory (AFRL) in Dayton, Ohio.

httpv://www.youtube.com/watch?v=4XDJC64tDR0


Nanotubes are tightly packed in the new carbon nanotube fibers. This cross section of a test fiber, which was taken with a scanning electron microscope, shows only a few open gaps inside the fiber. (Credit: D. Tsentalovich/Rice University)

“The new carbon nanotube (CNT) fibers have a thermal conductivity approaching that of the best graphite fibers but with 10 times greater electrical conductivity,” says study co-author Marcin Otto, business development manager at Teijin Aramid.

“Graphite fibers are also brittle, while the new CNT fibers are as flexible and tough as a textile thread. We expect this combination of properties will lead to new products with unique capabilities for the aerospace, automotive, medical, and smart-clothing markets.”

Hairball-like clumps

Carbon nanotubes, which are nearly as wide as a strand of DNA, are about 100 times stronger than steel at one-sixth the weight. Nanotubes’ conductive properties—for both electricity and heat—rival the best metal conductors. They also can serve as light-activated semiconductors, drug-delivery devices and even sponges to soak up oil.

Unfortunately, carbon nanotubes are also the prima donna of nanomaterials; they are difficult to work with, despite their exquisite potential. For starters, finding the means to produce bulk quantities of nanotubes took almost a decade.

Scientists also learned early on that there were several dozen types of nanotubes—each with unique material and electrical properties; and engineers have yet to find a way to produce just one type. Instead, all production methods yield a hodgepodge of types, often in hairball-like clumps.

Creating large-scale objects from these clumps of nanotubes has been a challenge. A threadlike fiber that is less than one-quarter the thickness of a human hair will contain tens of millions of nanotubes packed side by side. Ideally, these nanotubes will be perfectly aligned—like pencils in a box—and tightly packed.

Some labs have explored means of growing such fibers whole, but the production rates for these “solid-state” fibers have proven quite slow compared with fiber-production methods that rely on a chemical process called “wet spinning.” In this process, clumps of raw nanotubes are dissolved in a liquid and squirted through tiny holes to form long strands.

Wet spinning fibers

Shortly after arriving at Rice in 2000, Pasquali began studying CNT wet-spinning methods and worked with colleagues to create the first pure nanotube fibers. The work established an industrially relevant wet-spinning process for nanotubes that was analogous to the methods used to create high-performance aramid fibers—like Teijin’s Twaron—which are used in bulletproof vests and other products.

But the process needed to be refined. The fibers weren’t very strong or conductive, due partly to gaps and misalignment of the millions of nanotubes inside them.

“Achieving very high packing and alignment of the carbon nanotubes in the fibers is critical,” says study co-author Yeshayahu Talmon, director of Technion’s Russell Berrie Nanotechnology Institute, who began collaborating with Pasquali about five years ago.

The next big breakthrough came in 2009, when Talmon, Pasquali and colleagues discovered the first true solvent for nanotubes—chlorosulfonic acid. For the first time, scientists had a way to create highly concentrated solutions of nanotubes, a development that led to improved alignment and packing.

“Until that time, no one thought that spinning out of chlorosulfonic acid was possible because it reacts with water,” Pasquali says. “A graduate student in my lab, Natnael Bahabtu, found simple ways to show that CNT fibers could be spun from chlorosulfonic acid solutions. That was critical for this new process.”

Pasquali said other labs had found that the strength and conductivity of spun fibers could also be improved if the starting material—the clumps of raw nanotubes—contained long nanotubes with few atomic defects.

In 2010, Pasquali and Talmon began experimenting with nanotubes from different suppliers and working with AFRL scientists to measure the precise electrical and thermal properties of the improved fibers.

During the same period, Otto was evaluating methods that different research centers had proposed for making CNT fibers. He envisaged combining Pasquali’s discoveries, Teijin Aramid’s know-how and the use of long CNTs to further the development of high performance CNT fibers. In 2010, Teijin Aramid set up and funded a project with Rice, and the company’s fiber-spinning experts have collaborated with Rice scientists throughout the project.

“The Teijin scientific and technical help led to immediate improvements in strength and conductivity,” Pasquali notes.

Study co-author Junichiro Kono, a Rice professor of electrical and computer engineering, says, “The research showed that the electrical conductivity of the fibers could be tuned and optimized with techniques that were applied after initial production. This led to the highest conductivity ever reported for a macroscopic CNT fiber.”

Thinner wires

The fibers reported in Science have about 10 times the tensile strength and electrical and thermal conductivity of the best previously reported wet-spun CNT fibers, Pasquali says. The specific electrical conductivity of the new fibers is on par with copper, gold and aluminum wires, but the new material has advantages over metal wires.

For example, one application where high strength and electrical conductivity could prove useful would be in data and low-power applications, Pasquali says.

“Metal wires will break in rollers and other production machinery if they are too thin,” he says. “In many cases, people use metal wires that are far more thick than required for the electrical needs, simply because it’s not feasible to produce a thinner wire. Data cables are a particularly good example of this.”

The Teijin Aramid BV, Teijin Limited, AFRL, the Air Force Office of Scientific Research, Technion’s Russell Berrie Nanotechnology Institute, the Department of Defense, and the Welch Foundation supported the research.

Source: Rice University

chat3 Comments

You are free to share this article under the Creative Commons Attribution-NoDerivs 3.0 Unported license.

3 Comments

  1. Colin Van Leuven

    Could this be coated with the liquid-proof coating that the people at U of M and the Air Force are working on? Could that material be used to develop switches for the carbon nanotube wire? Cool idea and process…already sent the article to my son at Belden Wire, saying it could be a new product line for them…I left out the part about it could be the crushing competition…

  2. Benefits Of DIY

    Really a cool idea. I think this type of thread can be used to develop an electrical switch.

  3. Quality Cable Equipments

    What is the using of nanotube fiber? Can you tell me about it?

We respect your privacy.