"This is the first time anyone has designed flexible CNT circuits that have both high immunity to electrical noise and low power consumption, " says Zhenan Bao. (Bao Lab/Stanford)

Bendy carbon nanotube circuits get more efficient

Engineers would love to create flexible electronic devices, such as e-readers that could be folded to fit into a pocket. One approach involves designing circuits based on electronic fibers, known as carbon nanotubes (CNTs), instead of rigid silicon chips.

But reliability is essential. Most silicon chips are based on a type of circuit design that allows them to function flawlessly even when the device experiences power fluctuations. However, it is much more challenging to do so with CNT circuits.

But now researchers have developed a process to create flexible chips that can tolerate power fluctuations in much the same way as silicon circuitry.

“This is the first time anyone has designed flexible CNT circuits that have both high immunity to electrical noise and low power consumption, ” says Zhenan Bao, a professor of chemical engineering at Stanford University.

The findings appear in the Proceedings of the National Academy of Sciences. Huiliang (Evan) Wang, a graduate student in Bao’s lab, and Peng Wei, a previous postdoc in Bao’s lab, are the lead authors of the paper.

In principle, CNTs should be ideal for making flexible electronic circuitry. These ultra-thin carbon filaments have the physical strength to take the wear and tear of bending and the electrical conductivity to perform any electronic task.

But until this recent work from the Stanford team, flexible CNT circuits didn’t have the reliability and power-efficiency of rigid silicon chips.

Here’s the reason. Over time, engineers have discovered that electricity can travel through semiconductors in two different ways. It can jump from positive hole to positive hole, or it can push through a bunch of negative electrons like a beaded necklace. The first type of semiconductor is called a P-type and the second an N-type.

Most importantly, engineers discovered that circuits based on a combination of P-type and N-type transistors perform reliably even when power fluctuations occur, and they also consume much less power. This type of circuit with both P-type and N-type transistors is called a complementary circuit.

Over the last 50 years engineers have become adept at creating this ideal blend of conductive pathways by changing the atomic structure of silicon through the addition of minute amounts of useful substances—a process called “doping” that is conceptually akin to what our ancestors did thousands of years ago when they stirred tin into molten copper to create bronze.

The challenge facing the team was that CNTs are predominately P-type semiconductors and there was no easy way to dope these carbon filaments to add N-type characteristics.

The PNAS paper explains how the engineers overcame this challenge. They treated CNTs with a chemical dopant they developed known as DMBI. They used an inkjet printer to deposit this substance in precise locations on the circuit.

This marked the first time any flexible CNT circuit has been doped to create a P-N blend that can operate reliably despite power fluctuations and with low power consumption.

This process also has some potential application to rigid CNTs. Although other engineers have previously doped rigid CNTs to create this immunity to electrical noise, this precise and finely tuned process out-performs these prior efforts, suggesting that it could be useful for both flexible and rigid CNT circuitry.

Bao has focused her research on flexible CNTs, which compete with other experimental materials, such as specially formulated plastics, to become the foundation for bendable electronics, just as silicon has been the basis for rigid electronics.

As a relatively new material, CNTs are playing catch-up to plastics, which are closer to mass market use for such things as bendable display screens. The new doping process moves flexible CNTs closer toward commercialization because it shows how to create the P-N blend, and the resultant improvements in reliability and power consumption, already present in plastic circuits.

Although much work lies ahead to make CNTs commercial, Bao says she believes these carbon filaments are the future of flexible electronics, because they are strong enough to bend and stretch, while also being capable of delivering faster performance than plastic circuitry.

“CNTs offer the best long term electronic and physical attributes,” Bao says.

Additional researchers contributed to the study from Stanford and the University of Rochester.

Source: Stanford University

chat1 Comment

You are free to share this article under the Creative Commons Attribution-NoDerivs 3.0 Unported license.

  1. Rob N

    As an engineer who took some classes on this in college, it’s refreshing to read an article that actually goes into some depth in the technical parts. Most websites will just wave their hands and say “smart people figured stuff out” as soon as it gets too sciencey.

We respect your privacy.